Crystal AutoShield VentureShield Clear Bra Installation

What is Clear Bra or Paint Protection Film?
Paint Protection Film is a clear film made of thermoplastic-urethane. The film is supplied with a pressure contact
adhesive that bonds to the finished surface such as paint or plastic. Depending on the quality of the film, it is
extremely clear and strong, designed to protect the surface from scratching or chipping. Clear Bra creates a resilient
barrier creating a ricochet effect that will take years of abuse from gravel, dirt, salt, rocks, sand, and other air and
waterborne projectiles. Crystal Auto Shield uses this high grade film available with the highest clarity, longevity and
strength.

How was Paint Protection Film developed?
PPF was originally designed and used by the Military. Helicopter blades are extremely expensive and are susceptible
to abuse in the air. Funding departments found that Helicopter blades were one of the highest maintenance expenses
for those aircrafts and needed a solution to slow down the wear. A thermal plastic film was developed to shield the
front of the blades and it turned out to be a huge success. The film later progressed to protect Race Cars. Sponsors
realized they no longer had to repaint vehicles after just a few races!

What are the advantages of a Clear Bra vs. a Vinyl Bra?
Vinyl Bras have many down sides. The biggest one of them all is how ugly they make your car look! Today's vehicle
body styles are also making it difficult if not impossible to install. Vinyl bras require a lot of care. You must remove
the bra frequently to wash out the backside and regular use of vinyl conditioner will only last a few years. Another
negative is that the vinyl bra will flap if not tightly installed, catch dirt and debris underneath and will wear away the
paint. Vinyl bras do not allow for the paint on a vehicle to fade evenly. The end result is kind of like a farmer's tan, but
on your car! Lastly, they also cannot protect headlights or mirrors.

Can a Clear Bra affect the appearance of my vehicle?
The clear bra film is virtually undetectable if you do not know it is on the car. The edges of the film follow the contour
of the body. PPF is difficult to see once it is properly applied. The film is 95% clear.

How long does it take to install a full kit?
Average installation times range from 4-6hrs, depending on the complexity of the kit and or vehicle. Premium full
coverage installations will take longer.

How long does the film last?
Today's Paint Protection Film lasts longer than it ever has. We have seen cars with older substandard films dry out
and yellow within two years. At Crystal AutoShield, our film is guaranteed to never yellow, crack, or bubble for as long
as you own your vehicle. It is subject and backed by the Venture Shield Warranty. Minimal Recommended care is
required.

Can Paint Protection Film be installed on a vehicle a few years old?
PPF can be installed on a vehicle that has not been protected. We have covered many vehicles that were slightly
chipped. It is recommended to have a Professional detailer use Factory touch up kits to hide the chips and polish the
panels to be covered for oxidation removal prior to the film installation. The appearance of course will not be flawless
and that is why it is best to protect the vehicle when it is new or after it has been repainted. Again we must inform you
that we cannot be responsible for repaints if the shop did not prep the surface properly.

What if I just got my car painted. Can I get a Clear Bra right away?
No. The most common amount of time needed for a proper cure is 30 days. It is best to contact your Body Shop.
Body Shops use a wide range of suppliers for their paint materials. Tell your Body Shop to contact their paint supplier
for information if they are unsure. The paint supplier or manufacturer will be the best source for the correct cure time.
Can the PPF film be installed on plastic?
Yes. PPF is also an excellent option for plastic. Headlamps are the most common plastic component to protect. It is
important to protect headlamps due to their high cost. It is common to see Headlamps priced well over $1000 for high
end Xenon headlamps.

Will my paint fade differently for areas not covered?
No. The material contains an inhibitor to prevent the plastic from reacting to the sun's UV rays and prevent yellowing,
but this does not prevent the UV rays from passing through the plastic into your paint. As a result, your paint will fade
evenly with the rest of the vehicle.

Is Paint Protection Film permanent or can it be removed?
Paint Protection Film is not permanent and can be removed. All though once installed it will last for years, it can be
removed anytime as desired. PPF is recommended for all painted surfaces or plastic. However on a repainted vehicle
we cannot be responsible if it lifts the paint when removed. On a Factory Paint job the film will not lift the paint.

Can I reuse my Clear Bra Kit if it is removed from my vehicle?
No. Unfortunately a Clear Bra kit cannot be reused once removed. The adhesive on the film will no longer adhere to
another surface once it has set and cured. Also the film will become over stretched and disfigured during the removal
process.

Should I have my car detailed before our appointment?
No. A Full Detail is not necessary unless the panels covered are affected by bird droppings, polishing swirl marks,
oxidation or hard water stains. Detailing services can be arranged if needed or you may use the detailer of your
choice. We always try to minimize installation time and cost to our customers and definitely appreciate a clean
vehicle at the time of the appointment.